Indicated below are the steps for loading the incense powder into the burners

---

Step 1 - Getting Started

Place burner in the center of shipping box or on a smooth protected surface such as a piece of paper. Pour an ample amount of powder into center of the burner. Warning...Do NOT Allow any incense to touch any varnished, painted or plastic surfaces. Keep powder out of reach of children and pets Not for human consumption

---

Step 2 - Level Incense Powder

Moving the tamp in a circular motion, starting in the center and working outward, gently fill the grooves of the burner with the incense powder. DO NOT PACK the powder. Let the powder fall naturally into the grooves.

When you have filled the burner, take the excess powder that has fallen from the sides of the burner and store in the plastic bag.

---

Step 3 - Light The Incense Powder

Using a blunt ended item such as the end of the ash removal brush or a match, lift up a very small amount of the powder to form a mound (wick). Light the mound of powder with a match or lighter. The powder will continue to burn.

---

Step 4 - Stopping The Incense Powder From Burning

A unique feature of the incense powder is the capability of starting and stopping the burn. To stop the burning of the powder, make a seperation in the powder just in front of the burn. The powder should stop at this point. To restart, refer back to Step 3.

---